浙江波皇装饰材料有限公司Zhejiang Bohuang Decoration Material Co., LTD.
Hotline:0571-82512172

Hotline

0571-82512172

Manufacturing material description of Modern Bus Intelligent shelter

Date:2021-08-19292Visits

Nowadays, bus shelters are quite common in urban life, the use of materials is getting better and better, and the performance has been greatly improved. Next, the intelligent bus shelter will introduce the manufacturing material description of modern bus shelter.

1、 Shelter roof:

1. The supporting bow is made of 3.0mm thick carbon steel plate, phosphated, and the surface is sprayed with outdoor powder. 2. The top frame is made of 1.5mm and 2.0mm carbon steel laser and sheet metal. 3. The top sunshade and rain shield adopts 8mm PC sunvisor, and the PC sunvisor is fixed with 1.0 stainless steel pressure strip.

2、 Shelter post:

1. The column is 3.0mm thick and 160mm thick × 160mm carbon steel column, hot dip galvanized, surface sprayed with outdoor powder.

2. The column base adopts adjustable movable base plate for correcting parallelism. 3. The column is connected with the lamp box and the top support bow with stainless steel bolts.

3、 Shelter box:

1. The box body is made of 1.5mm thick carbon steel plate, phosphated, and the surface is sprayed with outdoor powder. 2. 40W lamp tube is set in the box; 21 / large light box, 5 / small light box. 3. Two 40 W ballasts are set in the box; 11 / large light box, 3 / small light box.

4. The lamp holder is made of 1.5mm thick carbon steel plate, phosphated, and the surface is sprayed with outdoor powder.

5. A Delixi leakage switch and a set of OMAX time control switch assembly are added at each station.

4、 Shelter frame:

1. The outer frame is made of 2.0mm thick carbon steel plate, phosphated, and the surface is sprayed with outdoor powder. 2. The transparent plate adopts 8.0mm thick transparent tempered glass.

3. The combination of transparent plate and outer frame adopts K-type 3 × 10. Waterproof and dustproof rubber pad shall be pressed with zinc plate.

4. Gradient lace is arranged on the transparent plate. 5. Cloth pulling device is set around the inner periphery of the outer frame.

5、 Coordination between the shelter box and the outer frame: 1. The box and the outer frame are connected by hinges.

2. P-type 5 is added for the cooperation between the box and the outer frame × 10 waterproof and dustproof sealant strip. 3. When the outer frame is opened, it is fixed by hydraulic steam strut, and when it is closed, it is fixed by anti-theft suitcase lock.

6、 Shelter seat stool:

1. The seat stool is made of 1.5mm and 2.0mm steel plates and sheet metal, and is sprayed with outdoor powder after phosphating.

7、 Bus shelter foundation embedded parts:

1. The flat plate is 10.0mm thick and 380mm thick × 380mm × 1 carbon steel plate / column. 2. Vertical steel φ fourteen × 750mm × 4 threaded steel bars / columns. 3. The connection between flat plate and vertical steel adopts electric welding.

8、 Concrete proportion and pouring of bus shelter Foundation: 1. Concrete proportion: 1:3:4. 2. The concrete is poured in two times.

9、 All bolts (except anchor bolts) of the bus shelter are made of stainless steel.

If you have any questions, you are welcome to consult more about the intelligent bus shelter.

Manufacturers of bus shelters, bus stops, bus shelters, intelligent bus shelters, bus stops, newspaper columns, billboards, road nameplates, signboards, electronic signboards, rolling light boxes, bicycle sheds, public bicycle systems, intelligent picture changing control systems, rolling light boxes.